The best camera mounts depend on where you need to attach a camera or accessory, and whether your setup calls for a clamp, cage, tabletop stand, or monitor holder. These picks cover hands-free action footage, adjustable monitor placement, and rig building, so match the mount to your camera, attachment point, and gear weight.
Quick Top Products
SmallRig Cool Ballhead Arm 1138
- Clamps to rods, tubes, tables, or frames without drilling.
- Includes a super clamp and an action camera mount.
- Rated to support up to 1.5 kg.
Best For: Creators who need to secure a small camera or accessory to a tube, rod, table, or frame.
SmallRig 9.8-Inch Magic Arm Clamp Kit
- Includes a 9.8-inch articulating arm and super clamp.
- Clamp opens from 15 mm to 54 mm.
- Ballheads offer 360-degree adjustment.
Best For: Filmmakers positioning a monitor, light, or microphone away from a clamp point.
SmallRig Field Monitor Mount BSE2346
- Designed for 5- and 7-inch monitors.
- Swivels 360 degrees and tilts 140 degrees.
- Includes a cold shoe adapter and 1/4-20 monitor screw.
Best For: Videographers who want to position a 5- or 7-inch monitor on a camera's cold shoe.
SmallRig Super Clamp with 1/4- and 3/8-Inch Threads
- Clamp jaw fits surfaces from 15 mm to 40 mm thick.
- Has both 1/4-inch and 3/8-inch threaded holes.
- Includes one super clamp.
Best For: Photographers who need a simple clamp to mount accessories on a compatible surface or tube.
SmallRig Adjustable Monitor Mount 6314
- Uses a bottom 3/8-16 ARRI locating screw.
- Supports landscape and portrait monitor installation.
- Offers 360-degree pan and 180-degree tilt.
Best For: Videographers mounting a monitor to an ARRI locating point on a cage or handle.
SmallRig Camera Monitor Mount 6313
- Slides into a cold or hot shoe for quick setup.
- Offers 180-degree tilt and 360-degree pan.
- Supports horizontal and vertical installation.
Best For: Videographers seeking a quick cold-shoe monitor attachment with portrait and landscape adjustment.
SmallRig 11-Inch Magic Arm Clamp 5311
- Includes an 11-inch magic arm and crab-shaped clamp.
- Clamp fits supports from 15 mm to 40 mm in diameter.
- Rated for a maximum payload of 1.5 kg.
Best For: Action-camera and compact-accessory users who need extended positioning from a tube or tabletop clamp.
SmallRig 7-Inch Magic Arm Clamp 5310
- Combines a 7-inch magic arm and crab-shaped clamp.
- Fits tubes and other supports from 15 mm to 40 mm.
- Maximum payload is 1.5 kg.
Best For: Vloggers and studio shooters who want a compact clamp arm for an action camera or small accessory.
SmallRig Camera Mount C Stand 3488
- Height adjusts from 19 to 39 inches with the ballhead and clamp.
- Ballhead rotates 360 degrees and tilts from -90 to +45 degrees.
- Desk clamp fits surfaces up to 1.85 inches thick.
Best For: Desk-based streamers and creators positioning a camera or ring light over a work surface.
SmallRig NATO Rail Handle 1955
- Attaches to a standard NATO rail without tools.
- Handle adjusts forward-back and side-to-side for balance.
- Has two cold shoes and several threaded mounting points.
Best For: Camera operators who need a top grip and accessory mounting points on a rig with a NATO rail.
All-Purpose Clamp and Ballhead
SmallRig Cool Ballhead Arm Super Camera Clamp Mount Double Ball Adapter, Fence Desk Table Mount for Ronin-M for Insta360, for Gopro - 1138
The SmallRig 1138 pairs a super clamp with a double ball adapter, giving you a flexible way to position a camera, monitor, light, or microphone. Its clamp attaches to rods, tubes, tables, and frames without drilling, while a locking knob secures the setup.
The 1/4-inch screw and included action camera adapter widen the mounting options. Its rated load is up to 1.5 kg, so it suits compact gear rather than heavy rigs.
For a moving setup, the included safety guidance recommends attaching a safety rope to help prevent an accidental drop.
Best For: Creators who need to secure a small camera or accessory to a tube, rod, table, or frame.
| Pros | Cons |
|---|---|
|
|
Choose the 1138 when you want one clamp-based mount for a mix of small gear and attachment points. Its action camera adapter is useful for POV angles, while the double ballhead lets you change orientation.
Check that your mounting surface fits the clamp and that the total equipment weight stays within its rating. If your setup needs a longer adjustable arm or a dedicated monitor shoe connection, another style may suit it better.
Long-Reach Magic Arm Kit
SMALLRIG 9.8 Inches Magic Arm Clamp Kit with 1/4" and 3/8" Threaded Holes
This SmallRig kit combines a super clamp with a 9.8-inch articulating arm, giving you more reach than a direct clamp or short ballhead. The clamp has 1/4-inch and 3/8-inch threads and opens from 15 mm to 54 mm.
Double ballheads rotate 360 degrees, allowing you to set the accessory angle at either end of the arm. Rubber cushions help protect clamped surfaces and accessories.
The kit works with monitors, microphones, lights, and camera accessories, but it is not corrosion-resistant, so it is not a good fit for seawater use.
Best For: Filmmakers positioning a monitor, light, or microphone away from a clamp point.
| Pros | Cons |
|---|---|
|
|
The 9.8-inch arm suits a compact rig where the accessory needs to sit clear of the clamp point. Its dual ballhead design provides flexible positioning, while the broad jaw opening accommodates a range of surfaces.
Before buying, check both the attachment thread and the dimensions of the surface you plan to grip. The seawater limitation matters for marine work; for a simple low-profile attachment, a direct clamp may take less space.
Swiveling Cold-Shoe Monitor Holder
SmallRig Field Monitor Mount Holder with Cold Shoe and 1/4" Inch Screw for 5 Inch and 7 Inch Monitor, with 360 Degree Swivel and 140 Degree Tilt, Rubber Cushion, Aluminum Alloy Build - BSE2346
The BSE2346 is a dedicated holder for a 5- or 7-inch field monitor. A cold shoe attaches it to the top of a camera or another compatible mounting system, and a bottom 1/4-20 screw connects to the monitor.
It swivels 360 degrees horizontally and tilts 140 degrees vertically, offering useful framing adjustments from behind the camera. Rubber cushions protect the display surface, and the CNC-machined aluminum mount supports monitors weighing up to 1.2 kg.
The package also includes a hex spanner for tightening the connection.
Best For: Videographers who want to position a 5- or 7-inch monitor on a camera's cold shoe.
| Pros | Cons |
|---|---|
|
|
Pick this holder if your video setup uses a 5- or 7-inch monitor and a cold shoe connection. Its horizontal swivel and vertical tilt give you freedom to adjust the viewing angle, and the rated monitor capacity offers a clear weight limit.
Confirm the monitor's attachment and weight before buying. If you need ARRI locating hardware or portrait orientation, consider a different monitor mount in this roundup.
Compact Standalone Super Clamp
SMALLRIG Super Clamp with 1/4 and 3/8 Thread for Cameras, Lights, Umbrellas
This standalone SmallRig super clamp is a straightforward anchor for cameras, lights, umbrellas, shelves, hooks, and crossbars. Its jaw spans 15 mm to 40 mm, and the clamp includes both 1/4-inch and 3/8-inch threaded holes for attaching compatible accessories.
Rubber pads help limit slipping and scratches on the clamped object. The package contains the clamp itself, so plan on adding a ballhead or arm if you need an adjustable extension between the surface and your camera gear.
The stated maximum weight recommendation is 3.3 pounds; keep the mounted equipment within that limit.
Best For: Photographers who need a simple clamp to mount accessories on a compatible surface or tube.
| Pros | Cons |
|---|---|
|
|
Choose this clamp if you already have a compatible accessory or arm and only need a secure attachment point. Its threaded holes and padded jaw provide a useful base for a small rig, but the package does not include a positioning arm.
Measure the surface you want to grip and check how your camera accessory attaches. If you want an adjustable position right out of the box, a clamp-and-arm kit is a more complete purchase.
ARRI Locating Monitor Mount
SMALLRIG Adjustable Camera Monitor Mount with 3/8"-16 Locating Screw for ARRI, 360° Swivel and 180° Tilt, Anti-Twist 1/4" Locating Screw, Horizontal & Vertical Shooting
The SmallRig 6314 is built for monitors attached to a cage, top handle, or other support through a 3/8-16 ARRI locating screw. Its top uses a retractable 1/4-20 locating screw and locating pins to help keep a compatible monitor from twisting.
The mount pans 360 degrees and tilts 180 degrees, and it supports both landscape and portrait installation. A thumb knob adjusts the tilt damping to suit devices of different weights.
The aluminum alloy and stainless steel body weighs 75.6 g. Check your cage's locating hole and the monitor's mounting interface before choosing this style.
Best For: Videographers mounting a monitor to an ARRI locating point on a cage or handle.
| Pros | Cons |
|---|---|
|
|
Choose the 6314 if your cage or handle has an ARRI locating hole and you want to rotate the monitor between landscape and portrait. Its retractable top locating screw and pins add a more secure interface for compatible displays.
Check that the camera rig has the needed ARRI hole and that the display uses the supported 1/4-20 interface. Since a maximum load is not specified, confirm the mount's suitability for your monitor before buying.
Cold-Shoe Mount with Damping Control
SMALLRIG Camera Monitor Mount with Cold Shoe, 180° Tilt and 360° Swivel, Retractable 1/4" Locating Screw Anti-Twist, Damping Adjust, Horizontal & Vertical Shooting
The SmallRig 6313 attaches a monitor or accessory to a cold shoe or hot shoe, then locks in place for quick installation and removal. Its top retractable 1/4-20 locating screw, pins, and silicone pad help prevent twisting and scratching on compatible monitors.
The holder tilts 180 degrees and pans 360 degrees, including portrait and landscape setups. Tilt damping adjusts with a thumb knob, letting you change the joint resistance for different device weights.
At 71.7 g, it is a lightweight option for camera rigs. Confirm the shoe and monitor connections match before using it.
Best For: Videographers seeking a quick cold-shoe monitor attachment with portrait and landscape adjustment.
| Pros | Cons |
|---|---|
|
|
The 6313 makes sense when a cold shoe or hot shoe is the natural attachment point on your camera. It adds portrait orientation and adjustable tilt damping, while the retractable screw and locating pins address monitor rotation at the top connection.
Check your monitor's thread and the shoe's locking fit. If your cage uses ARRI locating holes instead of a shoe, choose a mount built for that interface.
11-Inch Anti-Twist Clamp Arm
SMALLRIG 11" Magic Arm Clamp with 1/4"-20 Screw & Retractable Pins
The 5311 combines an 11-inch magic arm with a crab-shaped clamp for positioning an action camera, monitor, light, or microphone. Its arm end has a 1/4-20 screw and retractable pins, with a knurled thumbscrew for tool-free fastening and an Allen-wrench hole for extra tightening.
The clamp fits tubes, tables, tripod legs, or stabilizer rings from 15 mm to 40 mm. Ball joints loosen and move together with a wingnut, then lock in position.
Its maximum payload is 1.5 kg, making it a fit for compact accessories rather than heavier camera rigs.
Best For: Action-camera and compact-accessory users who need extended positioning from a tube or tabletop clamp.
| Pros | Cons |
|---|---|
|
|
Choose the 5311 when reach and an anti-twist attachment matter more than carrying heavier gear. The 11-inch arm gives you room to place a compact camera or accessory away from a mounting point, while the clamp accommodates several common rig surfaces.
Check the arm's reach against your setup and keep the load within its limit. If space is tight or you need a monitor mount attached directly to a shoe, a shorter holder will be simpler.
Short-Reach Anti-Twist Clamp Arm
SMALLRIG 7 Inches Magic Arm Clamp, with 1/4 Screw & Anti-Deflection Pin
The 5310 has the same useful clamp-and-arm approach as a long magic arm, in a shorter 7-inch format. It combines a crab-shaped clamp with a ball-jointed arm ending in a 1/4-20 screw and retractable pins.
A knurled thumbscrew makes tool-free fastening possible, and an included Allen wrench can reinforce the connection. The clamp fits supports from 15 mm to 40 mm, while the rated payload is 1.5 kg.
It suits compact cameras, monitors, lights, and microphones when a smaller positioning span is enough.
Best For: Vloggers and studio shooters who want a compact clamp arm for an action camera or small accessory.
| Pros | Cons |
|---|---|
|
|
This shorter arm suits a rig where you need to move a small accessory clear of a clamp without adding the reach of a longer arm. The retractable pins provide an anti-twist connection for compatible cages and action-camera frames.
Check that 7 inches is enough to clear nearby gear and that your support falls within the clamp's diameter range. For a larger setup or heavier monitor, verify the payload and consider a direct mount with a documented higher capacity.
Height-Adjustable Desktop Camera Stand
SMALLRIG Camera Mount C Stand, 15"-35" Adjustable Desk Clamp Table Tripod
The SmallRig 3488 is a tabletop clamp stand with a three-section pole that adjusts from 19 to 39 inches, including the ballhead and C-clamp. Its ballhead rotates 360 degrees and tilts from -90 to +45 degrees, making it useful for adjusting a camera or light for streaming, interviews, and beauty shooting.
The clamp fits tables up to 1.85 inches thick, and the stand supports up to 3 kg. It also includes a ring light adapter.
This style saves desk space compared with a floor tripod, but depends on a secure, compatible tabletop edge.
Best For: Desk-based streamers and creators positioning a camera or ring light over a work surface.
| Pros | Cons |
|---|---|
|
|
Choose the 3488 for a desk-based setup where an overhead camera or ring light needs adjustable height. Its telescoping pole and ballhead provide more framing options than a fixed desk mount, and the included ring light adapter adds flexibility.
Measure your table edge and confirm the working height suits your camera angle. If you need a stand that travels with a camera rig or attaches to a tube, a smaller clamp arm is more adaptable.
Quick-Release Top Rig Handle
SmallRig NATO Rail Handle, Top Handgrip with Mounting Points, Cold Shoe Mount for Camcorder Camera Cage - 1955
The SmallRig 1955 is a top handle that attaches to a standard NATO rail without tools. Its grip can adjust forward to back and side to side to help balance a camera or camcorder, and the handle offers two cold shoes, 1/4-20 and 3/8-16 threads, and ARRI-style locating holes for rig accessories.
A stored Allen wrench helps with adjustments, and the grip can be reversed by loosening its side screws. The handgrip is 118 mm long, which may feel short for larger hands.
Confirm your cage has a compatible NATO rail; the rail is not included.
Best For: Camera operators who need a top grip and accessory mounting points on a rig with a NATO rail.
| Pros | Cons |
|---|---|
|
|
The 1955 is a rig handle rather than a direct camera mount, so it suits operators who already use a cage with a NATO rail. It provides a carrying grip and multiple places to attach accessories, while its adjustable position helps balance the setup.
Check your rail compatibility and whether the shorter grip fits your hand. If your aim is to mount a camera to a desk or tube, a clamp stand or clamp arm is the relevant choice.
How to Choose Camera Mounts
How We Picked Camera Mounts
This roundup focuses on products that hold or position a camera, monitor, light, or microphone on a defined support. The selected options span simple threaded clamps, articulated clamp arms, a cold-shoe monitor holder, an adjustable desktop stand, and a NATO top handle.
That range reflects different jobs: mounting action cameras on a tube, positioning a monitor beside a camera, raising a webcam over a desk, or carrying a rig with a top grip.
We favored mounts with a clear attachment method, documented compatibility, and a distinct role. Dedicated camera cages and power accessories fit narrower camera-specific or rig-building needs, so they do not replace a broadly useful mounting solution.
Before choosing, start with the gear you want to attach and the surface or interface that will support it.
Comparing Camera Mount Styles
A standalone super clamp is the smallest step up from a basic mounting point. The SmallRig clamp with threaded holes can grip a compatible surface, but it does not include an arm.
The 1138 adds a double ballhead and action camera adapter, while the 9.8-inch kit adds reach through an articulating arm. The 5311 and 5310 also pair a clamp and arm, with the 11-inch version providing more reach and the 7-inch version taking less space.
Their documented payload is 1.5 kg, so check your gear weight before mounting.
Monitor mounts need closer attention to the camera-side connection. The BSE2346 uses a cold shoe and supports 5- or 7-inch monitors, while the 6313 also uses a shoe connection and supports portrait or landscape positioning.
The 6314 attaches through an ARRI locating point, which requires a compatible cage or handle. Compare the available interface on your rig before comparing swivel range or adjustment style.
For desk use, the 3488 clamps to a table edge and raises a camera or light on a height-adjustable pole. Its 3 kg capacity and table-thickness limit matter more than monitor-style locating points.
The 1955 serves a different role: it gives a rig with a NATO rail a top grip and accessory attachment points, but the rail itself is not included.
| Product | Standout features | Best for |
|---|---|---|
| SmallRig Cool Ballhead Arm 1138Check Price |
| Creators who need to secure a small camera or accessory to a tube, rod, table, or frame. |
| SmallRig 9.8-Inch Magic Arm Clamp KitCheck Price |
| Filmmakers positioning a monitor, light, or microphone away from a clamp point. |
| SmallRig Field Monitor Mount BSE2346Check Price |
| Videographers who want to position a 5- or 7-inch monitor on a camera's cold shoe. |
| SmallRig Super Clamp with 1/4- and 3/8-Inch ThreadsCheck Price |
| Photographers who need a simple clamp to mount accessories on a compatible surface or tube. |
| SmallRig Adjustable Monitor Mount 6314Check Price |
| Videographers mounting a monitor to an ARRI locating point on a cage or handle. |
| SmallRig Camera Monitor Mount 6313Check Price |
| Videographers seeking a quick cold-shoe monitor attachment with portrait and landscape adjustment. |
| SmallRig 11-Inch Magic Arm Clamp 5311Check Price |
| Action-camera and compact-accessory users who need extended positioning from a tube or tabletop clamp. |
| SmallRig 7-Inch Magic Arm Clamp 5310Check Price |
| Vloggers and studio shooters who want a compact clamp arm for an action camera or small accessory. |
| SmallRig Camera Mount C Stand 3488Check Price |
| Desk-based streamers and creators positioning a camera or ring light over a work surface. |
| SmallRig NATO Rail Handle 1955Check Price |
| Camera operators who need a top grip and accessory mounting points on a rig with a NATO rail. |
Check Interfaces, Clearance, and Weight
The most common mismatch is buying a mount that cannot connect to your camera rig. Check whether you need a cold shoe, hot shoe, 1/4-20 thread, 3/8-16 thread, ARRI locating hole, or NATO rail.
A monitor's screw location and the camera cage's available mounting point both matter. For clamp mounts, measure the tube or table edge; the selected products have different jaw ranges, so one clamp's fit does not imply another will fit.
Next, account for the weight and position of everything on the arm. A long arm can place a monitor where it is easier to see, but it also extends the load away from the clamp.
Keep within the relevant product's rating and tighten its joints and clamp as intended. For moving camera setups, follow any included safety guidance, such as using a safety rope where recommended.
Choosing a Camera Mount for Your Setup
For a compact action camera or small accessory on a tube, start with the 1138 or a 5310/5311 clamp arm, depending on how much reach you need. Choose the SmallRig 9.8-inch kit when a longer articulated arm and its 1/4- and 3/8-inch clamp threads suit your rig.
For a monitor, match the holder to your attachment point: cold shoe for the BSE2346 or 6313, ARRI locating hole for the 6314.
For streaming at a desk, the 3488 is purpose-built for an adjustable tabletop camera or light position; check your desk thickness and the desired height. If your priority is a carrying and balancing grip, the 1955 is a top-handle option for a compatible NATO-equipped cage.
The right camera mount is the one whose interface, working reach, and supported load line up with the actual equipment and support surface you plan to use.