What this Flash Guide Number Calculator does
The Flash Guide Number Calculator estimates how far a flash can illuminate a subject at a selected aperture and ISO setting. It uses the guide number relationship, which connects flash output, aperture, and distance. The result is an estimated flash-to-subject distance in meters.
Enter the flash's guide number at ISO 100, the camera aperture, and the ISO sensitivity you plan to use. The calculator scales guide number for the entered ISO and divides by the f-number. Its result, Estimated Flash Distance (m), is a practical starting point for planning a portrait, product photograph, or other image made with a speedlight or studio flash.
A guide number is a rating of flash output under stated conditions. Manufacturers commonly specify a guide number at a particular zoom-head position and in a particular unit system. Check the flash manual or product documentation so the value you enter is the ISO 100 rating in meters. A number in feet cannot be entered as though it were meters.
How to use the Flash Guide Number Calculator
- Find the guide number. Use the flash's rating at ISO 100, expressed in meters. If the manual lists several values for different flash head zoom positions, choose the position you intend to use.
- Enter the aperture. Use the f-number set on the camera, such as f/2.8, f/4, or f/8. Enter the number portion only.
- Enter ISO. Use the camera's ISO setting for the exposure. The calculator adjusts the guide number according to the square root of the ISO ratio.
- Read the estimated distance. The result is in meters, measured from the flash to the subject. Treat it as a guide to placement and exposure testing.
For example, suppose a flash has a guide number of 36 meters at ISO 100, the lens is set to f/4, and the camera is at ISO 100. The calculation is 36 × √(100 ÷ 100) ÷ 4, which equals 9 meters. Under the simplified relationship, that is the estimated maximum flash-to-subject distance for the stated settings.
If the camera is instead set to ISO 400 while the guide number and aperture remain the same, the ISO factor becomes √(400 ÷ 100), or 2. The calculation becomes 36 × 2 ÷ 4, giving an estimate of 18 meters. This illustrates how ISO changes the estimated reach in the model.
How the Flash Guide Number formula works
The underlying relationship is guide number = aperture × distance. Rearranging it to solve for distance gives distance = guide number ÷ aperture. A higher f-number represents a smaller aperture opening, so the flash must be closer to provide the same exposure. A wider aperture allows the estimated distance to increase.
Guide number changes with ISO because a more sensitive setting requires less light for a given exposure. The calculator uses this adjustment:
Distance in meters = guide number at ISO 100 × √(ISO ÷ 100) ÷ aperture
The square root reflects the conventional guide number scaling with ISO. Doubling ISO does not double guide number. The model applies the square root of the ISO ratio. At ISO 100, the factor is 1, so the entered rating remains unchanged.
This is a simplified calculation. It assumes that the guide number accurately describes the flash at the selected zoom position and that the subject receives the direct flash output represented by that rating. The formula does not model room reflections, modifiers, diffusion, obstructions, flash power settings, or the subject's reflectance.
Use cases for the Flash Guide Number
The estimate can help with quick planning before taking a test frame. Photographers can compare a planned distance with a flash's rated output and see how changing aperture or ISO affects the calculation. It is useful when working without automatic flash metering, when checking a manual flash setup, or when learning the relationship among light output, camera sensitivity, and lens aperture.
- Portrait setup: Estimate whether a flash placed several meters from a person is within the modeled range at the chosen aperture.
- Small product photography: Judge whether a light stand can remain at a consistent distance while changing the aperture for depth of field.
- Event preparation: Compare settings for a direct flash shot before testing in a room with changing subject distances.
- Equipment comparison: Use correctly specified guide numbers to understand the relative reach claims of different flash units.
For a worked setup, a 24-meter guide number, ISO 200, and f/4 produce 24 × √(200 ÷ 100) ÷ 4, or about 8.49 meters. This is only the result of the guide number model. In practice, photographers commonly take a test image and adjust flash power, distance, aperture, or ISO based on the histogram and the intended lighting.
Other factors to consider when calculating flash distance
Guide number ratings depend on how the flash is configured. A zoom head that concentrates light into a narrower beam can have a different rating from a wide beam setting. Make sure the selected rating corresponds to the flash head position being used. Confirm the unit as well, since feet and meters differ substantially.
Light modifiers reduce or redirect the light that reaches the subject. Softboxes, umbrellas, bounce surfaces, and diffusers can all change the effective output. Their impact depends on the modifier and setup, so this calculator does not apply a generic loss factor.
Ambient light and flash exposure also play different roles. The estimate concerns the flash contribution under the guide number assumptions. Shutter speed, within the camera's flash synchronization limits, can affect ambient exposure, while aperture and ISO affect both ambient and flash exposure. High speed sync can reduce effective flash output, so a standard guide number may not represent that use accurately.
Finally, the distance is not a guarantee of a particular brightness or image quality. Flash condition, battery state, recycle behavior, bounce angle, and subject reflectance can affect results. Use the calculated value to choose an initial position, then review a test frame and refine the lighting for the scene.
Flash Guide Number Calculator FAQ
What does a flash guide number mean?
A guide number describes the relationship between a flash's output, aperture, and distance under specified conditions. In the basic relationship, guide number equals f-number multiplied by distance. Ratings should be interpreted with their stated ISO, units, and flash-head settings.
Should I enter a guide number in feet or meters?
This calculator returns distance in meters, so enter a guide number expressed in meters at ISO 100. If the documentation gives a value in feet, convert it to meters before using the calculator, or find the meter rating in the manual.
How does changing ISO affect the estimate?
The model scales guide number by the square root of ISO divided by 100. Raising ISO increases estimated reach, while lowering ISO reduces it. The change is not a direct one-for-one multiplier.
Does this account for a softbox or bounced flash?
No. Modifiers and bounce techniques alter how much light reaches the subject, and the effect varies by equipment and placement. Use the result as a baseline for direct flash, then test and adjust for the actual setup.
Why does my photograph look different from the calculated result?
The calculation simplifies real lighting. Flash power, zoom setting, modifier losses, room surfaces, ambient light, subject reflectance, and exposure choices can all change the image. A test exposure is the reliable way to refine the setup.