Product Reviews

SmallRig 1138 Camera Clamp Review

A versatile clamp and dual ball-head mount for creators who need to attach compact gear to rods, tubes, tables, or frames.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

This SmallRig clamp review looks at a mount for creators who need to attach a camera or accessories to a rod, tube, or table.

SmallRig 1138 Review Summary

The quick verdict

SmallRig 1138 Camera Clamp
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig 1138 Camera Clamp

A versatile clamp and dual ball-head mount for creators who need to attach compact gear to rods, tubes, tables, or frames.

  • Clamp with dual ball-head adapter and 1/4-20 screw.
  • Supports up to 1.5 kg without loosening.
  • Locking knob secures it to a rod, tube, table, frame, or tripod.
  • Includes an action-camera mount adapter.

Pros

  • Combines a clamp, dual ball head, and action-camera adapter in one mount.
  • Works with several common compact accessories, including cameras, monitors, lights, and microphones.

Consider before buying

  • The 1.5 kg support limit rules it out for heavier camera and accessory combinations.
  • For moving setups, plan to attach a safety rope as an additional precaution.
Read the full review summary

This SmallRig clamp pairs a dual ball head and 1/4"-20 screw with an included action-camera mount adapter. It can mount cameras, webcams, monitors, lights, and microphones to a rod, tube, table, frame, or tripod without drilling.

The clamp supports up to 1.5 kg and locks to a rod, tube, table, frame, or tripod with a knob. Its aluminum and stainless-steel construction and included action-camera mount add flexibility; attach the safety rope in dynamic scenarios.

The buying factors

SmallRig 1138 Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting versatility

The clamp can attach to rods, tubes, tables, frames, and tripods, while the 1/4-20 screw supports a range of compact accessories.

8/10

Accessory flexibility

A dual ball-head design plus an included action-camera adapter covers several small-rig mounting needs.

6/10

Load suitability

The stated support limit is 1.5 kg, so the clamp is best matched to lighter accessories and compact camera setups.

7/10

Clamp stability features

Non-slip threads, an anti-twist structure, and a locking knob are useful design features for keeping a compact mount in place.

7/10

Build materials

Aluminum and stainless-steel construction gives this clamp a metal build.

5/10

Moving-rig suitability

The safety-rope reminder makes extra securing an important part of using the mount in dynamic setups.

Key Features and Specifications of SmallRig 1138

  • Clamp with dual ball-head adapter and 1/4-20 screw.
  • Supports up to 1.5 kg without loosening.
  • Locking knob secures it to a rod, tube, table, frame, or tripod.
  • Includes an action-camera mount adapter.
  • Aluminum and stainless-steel construction.
  • Measures 3.74 x 3.35 x 0.98 inches.

Pros and Cons of SmallRig 1138

Pros

  • Combines a clamp, dual ball head, and action-camera adapter in one mount.
  • Works with several common compact accessories, including cameras, monitors, lights, and microphones.
  • Attaches to multiple surfaces without drilling.
  • Non-slip threads and an anti-twist structure address movement at the clamp connection.

Consider before buying

  • The 1.5 kg support limit rules it out for heavier camera and accessory combinations.
  • For moving setups, plan to attach a safety rope as an additional precaution.
  • Check that your mounting surface and gear suit the clamp before setting up, especially for vehicle or outdoor use.

Who Should Buy SmallRig 1138?

Good fit

Choose this SmallRig clamp if you want to mount a camera, monitor, light, microphone, or action camera on a rod, tube, table, frame, or tripod.

The 1/4"-20 screw and included action-camera mount adapter give you options for those accessories without drilling.

It also suits creators who need a no-drill way to mount gear on a rod, tube, table, frame, or tripod. Keep the total load within 1.5 kg and use a safety rope when the rig will move.

Who should skip it

Skip it if your attached gear exceeds the 1.5 kg support limit, or if you need a clamp without a 1/4"-20 screw mount. It mounts cameras, webcams, monitors, lights, microphones, and action cameras.

SmallRig 1138 Review Analysis

Mounting options for compact rigs

This clamp pairs a dual ball head with a 1/4"-20 screw for mounting cameras, webcams, monitors, lights, and microphones. The included action-camera mount also lets you use it with an action camera.

Where it can attach

A locking knob secures the clamp to rods, tubes, tables, frames, and tripods, with no drilling required. That is useful for creators who need to position gear on an existing support or surface.

Load and movement considerations

The clamp supports up to 1.5 kg. If your setup may move, attach the safety rope to help prevent accidental drops.

Materials and package

The package includes a super clamp and an action-camera mount, with aluminum and stainless-steel construction. Check that the included mount and 1/4"-20 screw fit the gear you plan to attach.

Alternatives to SmallRig 1138

Camera Mounts & Clamps alternative

SMALLRIG 9.8 Inches Magic Arm Clamp Kit
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG 9.8 Inches Magic Arm Clamp Kit

Choose the SmallRig 2732 kit for its articulating arm and 1/4" and 3/8" threads. Choose the dual ball-head clamp for support up to 1.5 kg and its included action-camera mount adapter.

  • The SMALLRIG 9.8 Inches Magic Arm Clamp Kit pairs a super clamp with an articulating arm, offers 1/4-inch and 3/8-inch threads, and has a 9.8-inch arm.
  • The SmallRig dual ball-head clamp supports up to 1.5 kg and includes an action-camera mount adapter.

Camera Mounts & Clamps alternative

SMALLRIG Super Clamp with 1/4 and 3/8 Thread
4.7/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG Super Clamp with 1/4 and 3/8 Thread

Choose the Super Clamp if you need a jaw that opens from 15 mm to 40 mm and threaded holes for 1/4-inch and 3/8-inch accessories.

Choose the dual ball-head clamp for support up to 1.5 kg and its included action-camera mount adapter.

  • The SMALLRIG Super Clamp has 1/4-inch and 3/8-inch threaded holes and a jaw range from 15 mm to about 40 mm.
  • The SmallRig dual ball-head clamp supports up to 1.5 kg and includes an action-camera mount adapter.

Is SmallRig 1138 Worth It?

The SmallRig clamp is worth considering for creators who need to mount a camera or accessories on a rod, tube, table, frame, or tripod.

Its dual ball head, 1/4"-20 screw, and included action-camera adapter cover a range of small-rig setups without drilling.

Buy it when your planned load stays within 1.5 kg and you can secure a safety rope for dynamic use. If the rig is heavier, this clamp's stated capacity is a firm reason to choose another mounting approach.

Your review at a glance

SmallRig 1138 Camera Clamp
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig 1138 Camera Clamp

A versatile clamp and dual ball-head mount for creators who need to attach compact gear to rods, tubes, tables, or frames.

  • Clamp with dual ball-head adapter and 1/4-20 screw.
  • Supports up to 1.5 kg without loosening.
  • Locking knob secures it to a rod, tube, table, frame, or tripod.
  • Includes an action-camera mount adapter.

Written by

unblurai.com Editorial Team

Editorial team

unblurai.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 1138 Camera Clamp

SmallRig 1138 Camera Clamp

A versatile clamp and dual ball-head mount for creators who need to attach compact gear to rods, tubes, tables, or frames.

  • Clamp with dual ball-head adapter and 1/4-20 screw.
  • Supports up to 1.5 kg without loosening.
Check Video Reviews on Amazon